KP Tape 2 PAP

KP Tape 2 PAPAdhesive tape for overlap joints of indoor
moisture barriers and vapour control layers


KP Tape 2 PAP is an adhesive sealing tape
for thermal sealing of steep roofs. System tape for bonding Syn vapour barriers, as well as their transitions on overlaps, joints, connections and penetrations.  It complies with the high requirements for permanent bonding of draught-proof layers as per the EnEV and DIN 4108 part 7 It also bonds excellently to wood panels, PE construction foil and construction paperboard.

Product characteristics
The highly effective adhesive guarantees immediate adhesion on virtually all surfaces.
The carrier material from stretch-resistant kraft paper makes for fast and flat laying and it can be easily torn off by hand. The PE coating makes the sealing tape resistant against short-term condensation.

Processing instructions
The surfaces that are going to be glued must be dry, free of dust, dirt and grease, and be free from any residues of detergent or processing aids. Condensation and all mentioned residues should be wiped off. All bonds should be done without tension according
to recognized technical rules in accordance with the design recommendations of DIN 4108 Part 7 . In the case of designs in which no tension-free bonding can be ensured, additional mechanical fixing must be used. All bonds should be done at the recommended processing temperature and with sufficient contact pressure and must be checked before the final covering for adequate bonding and, if necessary, reworked.

Working temperature:
recommended + 5 C° , workability from – 10 C°

Packaging units:
Art. no. 1165 60 mm x 40 m 10 rolls/box